Art-Net controller for LED pixels and digital LED strips.
deskontroller LITE 16 universes, 1 universe by output.

Features

- deskontroller LITE 16 is designed to handle 16 Art-Net universes with the highest level of performance, (up to 50 frames per second, or 20 mS refresh time)

- Integrated SPI Controller, connects to the Ethernet port, and directly to the LEDs.

- Simple output connections, each RJ45 connector handles two outs.

- All combinations of RGB (510 Channels/universe), RGBW and Single Color (512 Channels/universe).

- Art-Net address (Net-Subnet-Universe) configuration on steps of 4 universes.

- Supported synchronization modes: Madrix® Sync and Art-Net® Sync.

- All setup parameters and avanced features from configuration by web browser.

- Electronics manufactured in Europe under ISO9001

7.5 VDC power adapter included. Connector available for EU, UK, US or AU.

Works with MADRIX, Resolume, MadMapper, TouchDesigner, VVVV, MagicQ PC, LightFactory, xLights, LXconsole, Glediator, Qlight, Lightjams, Enttec light mapper, Jinx, Mapio, and any software or console that supports the Art-Net® protocol.

Supported Art-Net I, Art-Net II, Art-Net III, Art-Net IV

Art-Net software Tested:

Outputs connections. 16 outputs availables

Each output handle one universe.

8x adapters RJ45 included

With standard network cables, using the RJ45 adapters included, making an installation is much easier. For most chipsets, there may be UTP cable distances from 50 to 80 meters from the deskontroller LITE, to the first pixel of each output.

Simple outputs connections by standard network cable UTP CAT5, CAT6, CAT7.

Each RJ45 are two outputs A (first univeres) and B (next universes) from the Adapter to the leds.

Uses UTP network cable to connect from the outputs to the screw adapters.

Connect the Adpater (DATA, CLOCK (if it have) and GND) to the LED strip or LED pixels.

deskontroller LITE includes 8xRJ45 connectors for the 16 outputs.

Additional configuration and tools.

Basic configurations such as IP, subnet, IC type, etc.

Now deskontroller LITE incorporates multiple control tools and facility to check the installations.

Custom IC type. Manually select the times T0H and T1H. With this custom configuration, you can handle any type of IC allowing adjust time..

Turbo mode. Increase the speed of the strips up to 50%.

Discover. Locate and configure from the setup, Art-Net devices connected to the network.

Status. Real-time information of the communication, framerate, diagnosis, quality of the Art-Net signal.

With this utility, you can check the performance of your computer.

Test effects. Different pre-programmed effects with stand alone operation.

LED types supported

APA102, DotStar, APA106(F8)(F5), APA109, CS8812

Custom (8 Bits/color), Custom (8 Bits/color) Rev. Pol. 

D705, D707, D708, DM412, DM413

GE8812, GE8822, GS8206, GS8208, HD107S

INK1002(B), INK1003

LC8805B, LC8808B, LC8812(B), LC8822, LC8823, LD1510 - 12 Bits, LD1510 - 8 Bits

LPD1101, LPD1882, LPD1886, LPD6803, LPD6813, LPD8803, LPD8806

P9813, P9816, P9823(F8)(F5), P9883

PD9823, PL9823, SC6803

SK6805, SK6812, SK6818, SK9822

SM16703, SM16704, SM16711, SM16716, SM16726, SM16726

TM1803, TM1804, TM1809, TM1812, TM1814, TM1825, TM1826, TM1829, TM1903, TM1913, TM1914, TM1925, TM1926

UCS1903, UCS1904, UCS2903, UCS2904, UCS2909, UCS2912, UCS3903, UCS512 High speed, UCS512 Low speed, UCS5903, UCS6909, UCS6912, UCS7009, UCS8903, UCS9812

WS2801, WS2803, WS2811, WS2812, NeoPixel, WS2812B, WS2812C, WS2812D(F5), WS2812S, WS2813(A)(B)(C)(D), WS2814, WS2815, WS2818, WS2821 High speed, WS2821 Low speed, WS2822 High speed, WS2822 Low speed, WS2851

Download USER MANUAL

Download DATASHEET

- Art-Net™ Designed by and Copyright Artistic Licence Holdings Ltd.
- The Art-Net protocol documentation is copyright Artistic Licence Holdings Ltd.
- All other company names and/or product names are trademarks and/or entered trademarks of their respective holders.

Powered by deskontrol electronics

MADE IN EUROPE - TWO YEARS OF WARRANTY