High performance Art-Net compliant...
High performance Art-Net compliant LED controller capable of handle 32 universes or 16384 channels at 50 frames per second.
MADE IN EU.
TWO YEARS OF WARRANTY.
22 Item in stock Items in stock
Warning: Last items in stock!
- 32 output universes (16384 channels) at 50 frames per second.
- Solderless output wiring, using inexpensive standard RJ45 network cables.
- Each output line handles 2 x 4 universes (2 x 2048 channels).
- All combinations of RGB and RGBW color reorder.
- Support for standard and non standard DMX modes (at TTL levels).
- Art-Net address (Net-Subnet-Universe) configuration on steps of 32 universes.
- Supported synchronization modes: Madrix® Sync and Art-Net® Sync.
- All setup parameters needed to run are configured from DIP switches, except IP address and Art-Net NET.
- Integrated SPI Controller, you don't need any other converter for drive digital led pixels and digital LED strips.
12 VDC power adapter included. Connector available for EU, UK, US or AU.
Works with any software or console that supports the Art-Net protocol as MADRIX, Resolume, MadMapper, Lightjams, Enttec light mapper, Jinx, Mapio, and others.
deskontroller 32 is designed to handle 32 Art-Net universes with the highest level of performance, (50 frames per second, or 20 mS refresh time) for most types of LEDs.
Now, output wiring it's easier than ever, thanks to use of standard RJ45 network cables (not included), and RJ45 to screw driver adapters (8 x included).
Universes are grouped on 4 universes blocks (2 x 4 universes on each output cable).
Supported modes Madrix® Sync and Art-Net® Sync.
We recommend its use when available, no configuration required, if your software sends Sync, deskontroller 32 detects it and activate for improved performance.
It allows configuration on 32 universes steps.
You can select 7 different start addresses from DIP switches, and up to 1024 start addresses using NET (only for Art-Net III.)
deskontroller 32 supports pixels and strips with 1, 3 or 4 channels per pixel (White, RGB or 3 whites, and RGBW)
For leds with different color order, you can select any RGB or RGBW order from DIP switches.
More than 60 chipsets are supported, all selected from DIP switches.
D705, D707, D708
DMX512 TTL levels, DMX500K TTL levels, DMX750K TTL levels, DMX1000K TTL levels, DMX1250K TTL levels, DMX1500K TTL levels, DMX2000K TTL levels, DMX2500K TTL levels
LPD1886, LPD1882, LPD6803, LPD6813, LPD1101, LPD8803, LPD8806
TM1803, TM1809, TM1812, TM1814, TM1829, TM1903, TM1926
UCS1903, UCS1903B, UCS1909, UCS1909B, UCS1912, UCS1912B , UCS2903, UCS2903S, UCS2909, UCS2912, UCS3903, UCS8903, UCS5903, UCS6909, UCS6912, UCS7009
WS2811, WS2812, NEOPIXEL, WS2812B, WS2812S, WS2813, WS2801, WS2803, WS2813, WS2813A, WS2813B, WS2813C, WS2813D, WS2818,WS2821, WS2822
- Art-Net™ is a trade mark of Artistic Licence Holdings Ltd.
- The Art-Net protocol documentation is copyright Artistic Licence Holdings Ltd.
- All other company names and/or product names are trademarks and/or entered trademarks of their respective holders.
Powered by deskontrol electronics
MADE IN EU - TWO YEARS OF WARRANTY
No customer reviews for the moment.
Adapter DB25 outputs to screw connectors for PixelController...
8,00 € Tax excl.
9,68 € Tax incl.
Up to 680 LED pixels. Firmware Upgradeable. On the fly color...
136,00 € Tax excl.
164,56 € Tax incl.
RJ45 to screw terminal Adapter for deskontroller Art-Net LED...
3,00 € Tax excl.
3,63 € Tax incl.
RJ45 splitter for deskontroller Use standard Network cable...
5,00 € Tax excl.
6,05 € Tax incl.
High performance Art-Net compliant LED controller capable of...
1 390,00 € Tax excl.
1 681,90 € Tax incl.