Art-Net LED Controller for LED pixels 6 universes

PCII-6U

New product

Up to 1020 LED pixels.
Firmware Upgradeable.
On the fly color reorder.
Supports: LX1003, INK1002, INK1003, APA102, WS2811, WS2812, WS1812B, WS2801, UCS1903, UCS1903B, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, LPD1883, LPD1886, WS2803, LPD6803, LPD1101, TM1803, TM1809, TM1812, UCS5903, UCS7009, LPD8803, LPD8806, P9813

More details

70 Items in stock

166,00 € tax excluded

200,86 € tax included

Weight: 0.4 kg
Delivery: 24 hours

Add to wishlist

More info

PixelController II 6 universes

Features


- Integrated SPI Controller for led pixels.
- Up to 6 output universes (1020 pixels).
- Firmware Upgradeable.
- On-the-fly RGB color reorder.
- Settings configured by DIP switches.
- Individual configuration of each output with PixelConf software.
- Power adapter 6 vdc included. Connector available for EU, UK or US
- Works with any console or software that supports Art-Net II protocol, as MADRIX®

We have rewritten from scratch all output modules, 100% in assembler, as a result of this, was possible to implement on-the-fly RGB color reordering without any loss of performance, and ultra-precise output timming, avoiding possible flickering problems.

*** PixelController incorporates serial output resistors to match impedance to led strips or pixels. Normally don't needs any other external resistor ***

LED swiches position


OFF ↑ - DIP switch UP
ON ↓ - DIP switch DOWN

RGB color order (Switches 1-2-3)

↑↑↑xxxxx = COLOR_RGB
↑↑↓xxxxx = COLOR_BRG
↑↓↑xxxxx = COLOR_GBR
↑↓↓xxxxx = COLOR_RBG
↓↑↑xxxxx = COLOR_GRB
↓↑↓xxxxx = COLOR_BGR

Supported chipset types
Framerate (FPS) / milliseconds (mS) maximum per universe

ChipsetSwitches4 Universes6 Universes8 Universes12 Universes
Dips 4 to 8FPSmSFPSmSFPSmSFPSmS
TM1803xxx↑↑↑↑↑5618372728361954
LPD1883, LPD1886 (24 bits color only)xxx↑↑↑↑↓4124273720491473
TM1809xxx↑↑↑↓↑5120342926391759
TM1812xxx↑↑↑↓↓5120342926391759
WS2811xxx↑↑↓↑↑4522303323441566
WS2812xxx↑↑↓↑↓4721313224421664
WS2812Bxxx↑↑↓↓↑4522303323441566
UCS1903, UCS1903B UCS1909, UCS1909B, UCS1912, UCS1912B UCS2903, UCS2903S, UCS2909 UCS2912, INK1002, INK1003, LX1003xxx↑↑↓↓↓4522303323441566
APA102xxx↑↓↓↑↑1437971073144920
WS2801, WS2803xxx↓↑↑↑↑1169771358173926
LPD6803, LPD1101 UCS6909, UCS5903 UCS7009xxx↑↓↑↑↓2414161612188012
LPD8803, LPD8806xxx↑↓↑↓↑1855123893116216
P9813, P9816xxx↓↑↑↓↓1666111983125518

Firmware Update Tool FirmUpdater


Firmware Update for PixelController II

With Firmware Update Tool FirmUpdate ensures you always have the latest version of firmware for optimal performance in all PixelController II controllers.

Configuration Tool PixelConf


Herramienta de configuracion PixelConf

Use the configuration tool "PixelConf" on switches mode to change IP and subnet, and Advanced mode with individual settings for each universe and 8 pre-configured settings.

Configuration modes PixelConf

Basic mode:

Allows you to modify the IP, Subned (Art-Net) is common for each secondary node (4 universes), and number of universe.

The chipset, SPI speed and color order are selected from the DIP switches.

Advanced mode:

- In this mode you have 8 different pre-settings (for programming of each pre-setting, use the preset buttons 0-7 above)

- All parameters can be different for each preset.
- To use a preset once programmed, you must select the DIP switches as shown in the screen image.

- Subnet (Art-Net) is common for each sub-node (4 universes).
- Network configuration is common to all universes.

1 wire bit timming (nS)

CHIPSET TYPET0-HT1-HT0-LT1-LTOTAL
TM18033007007003001,00 uS
TM18044509509504501,40 uS
TM18093507507503501,10 uS
TM18124008007003001,10 uS
WS281125065010006001,25 uS
WS28123507008506001,25 uS
WS2812B4008008504501,25 uS
UCS1903250100010002501,25 uS
LPD18832506006002500,85 uS

We can provide any other custom timing. Please, contact us

You can use ONE single board directly in broadcast mode, or use our Art-Net proxy to convert to unicast mode.

In unicast mode there is no limit of PixelController II connected

- Madrix® is a registered trademark of Inoage GmbH.
- Art-Net™ is a trade mark of Artistic Licence Holdings Ltd.
- The Art-Net protocol documentation is copyright Artistic Licence Holdings Ltd.
- All other company names and/or product names are trademarks and/or entered trademarks of their respective holders.

Certificado CEFCC certificateRoHS certificate

DOWNLOADS

User Manual
Update and configuration tools PixelTools V 2.16

MD5:12467a096ecb0476526fd9429e28b77f

User Manual PixelController II Rev. A

(For controllers with firmware version lower than 2.00)

Reviews

No customer reviews for the moment.

Write a review

Art-Net LED Controller for LED pixels 6 universes

Art-Net LED Controller for LED pixels 6 universes

Up to 1020 LED pixels.
Firmware Upgradeable.
On the fly color reorder.
Supports: LX1003, INK1002, INK1003, APA102, WS2811, WS2812, WS1812B, WS2801, UCS1903, UCS1903B, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, LPD1883, LPD1886, WS2803, LPD6803, LPD1101, TM1803, TM1809, TM1812, UCS5903, UCS7009, LPD8803, LPD8806, P9813

Customers who bought this product also bought:

6 related products.